Auto Brewery Syndrome and OVI Charges

In 2016, an upstate New York woman was charged with DUI after blowing a blood alcohol level more than four times the legal limit. However, after hearing testimony that the woman suffers from “auto-brewery syndrome,” a judge dismissed the charges after she hired Columbus DUI defense lawyers Sabol Mallory.

“Before this case, I had never heard of auto-brewery syndrome,” her attorney told CNN. “But I knew there was something wrong when the hospital police tried to release her right away because she wasn’t showing any symptoms.”

“That makes me want to go on the Internet to see if there is any kind of reason for a strange reading,” her attorney adds. “Up comes auto-brewery syndrome, and we’re off.”

“I’m in contact with about 30 people who think they have this syndrome, and about ten of them have been diagnosed,” said Panola College Dean of Nursing Barbara Cordell, who has researched the syndrome for years. “They will operate at alcohol levels of 0.30 to 0.40, when the normal person would be comatose or dying. One of the mysteries of this condition is how they can have such high levels and yet walk around and talk.”

Auto-brewery syndrome is an extremely unusual disease. Even if they do not drink alcohol, people with auto-brewery syndrome have abnormally elevated blood alcohol levels.

Auto brewery syndrome is thought to be caused by Crohn’s disease, liver disorders, inadequate diet, antibiotics, inflammatory bowel disease, a compromised immune system, and diabetes. Moodiness, confusion, trouble concentrating, lack of physical control, and memory issues are all possible symptoms.

When people with this condition, their bodies produce alcohol from the carbohydrates they consume. This occurs inside the stomach or intestines. It may be caused by an overabundance of yeast in the stomach. Yeast is a form of fungus. Any yeast strains that may be responsible for this condition are as follows:

  • Candida albicans

  • Candida glabrata

  • Torulopsis glabrata

  • Candida krusei

  • Candida kefyr

  • Saccharomyces cerevisiae 

The syndrome was discovered for the first time in 1912. It was then referred to as “germ carbohydrate fermentation.” It was researched in the 1930s and 1940s as a potential cause of vitamin deficiencies and irritable bowel syndrome. There are currently no diagnostic or treatment guidelines for auto-brewery syndrome, making it much more difficult to determine when patients have the condition.

The auto-brewery syndrome may result in a DUI arrest because it causes patients to have a blood or breath alcohol content above the legal limit despite the fact that no alcoholic beverage was consumed. It can, however, be used to protect against a DUI charge.

The defense will have to use expert testimony to prove to the court that the condition is valid, as well as the defendant’s medical history to prove that the disorder exists and that it led to the DUI crime.

If you have been arrested for a DUI crime, you can contact an OVI attorney Columbus Ohio right away. It is important that you meet with an attorney if you think you might be suffering from auto brewery syndrome.

 

 

Read more Auto Brewery Syndrome and OVI Charges

Mattress Cleaning Tips – Get Rid of Stains and Dust Mites

Every mattress needs some kind of mattress cleaning done from time to time. Whether it is your bed mattress or another kind of mattress, dust and other stuffs are bound to build up in there. Aside from just making the mattress look gross, these unwanted materials can cause serious problems. Aside from being uncomfortable, these materials can also be dangerous. These problems are compounded by the fact that the usual cleaning methods often leave residue behind. You will end up with a mattress that is matted, sticky, and unhealthy.

mattress cleaning

 

During mattress cleaning, you will have to remove all the loose, folded, and/or crumpled sheets on the bed. Wash these sheets individually using warm water and a mild detergent. Remove any blankets, pillows, and covers from the bed. If possible, move the mattress to another room.

 

After you have washed the sheets, use a vacuum cleaner to remove any visible debris on them. Sprinkle some baking soda on the clean sheets, and allow it to sit for approximately 20 minutes. This will kill any bacteria present. It is also important to note that you should only use a mild detergent for this purpose. Using a strong detergent may only cause the problem to worsen.

 

After you have completed the first step, you can proceed with the second one. For your vacuum cleaner, choose either a hand-held unit or an upholstery attachment. For the upholstery attachment, you can either choose a scrub brush or a microfiber attachment. After using the device on both the upholstery attachment and the hand-held unit, you can now proceed to the next step of mattress cleaning. This next task includes removing any remaining dust and dirt from the mattress.

 

For this task, you can either choose a HEPA filter that is designed to remove odors, or purchase an odorless mattress protector. These are designed to cover any remaining odors in the mattress. However, if you find that these products do not work well in removing odors, you can buy an air purifier. By mixing oxygen with plain water, you can create an excellent air purifier that can effectively remove mold and mildew odors from your mattress.

 

After vacuuming your mattresses, you can remove any remaining dust and dirt by hand. Mattresses can accumulate dust and dirt due to the action of people while sleeping. Even after you have cleaned your mattresses, they can still harbor bacteria and mold if they are not properly cared for. As much as possible, you should try to avoid sleeping on your mattresses until they are completely clean. This will ensure that the dust and bacteria will be completely gone.

 

If you have found that your mattress is filled with dust and smells musty, then you should consider using a humidifier. This will help eliminate any dampness that may be present. A humidifier works best when it is mixed with some air. Since air is heavier than water, it sinks to the bottom and helps eliminate odors that float to the top.

 

Aside from replacing your mattresses if they are stained or moldy, there are other methods that you can employ in order to freshen up your mattresses. You can try putting a slice of white bread on your mattress and leaving for several hours. This will rid your mattress of the smell of bread and any other unpleasant odor. You can also try using orange peels. Similar to white bread, orange peels will effectively rid your mattress of their unpleasant odors.

 

If you find that you have bed bugs and you need to clean them up, then you can spray gel or oil cleaner on them. This will effectively kill the bugs and the eggs they lay. You can also use warm soapy water and wash them down on your bed. While you are doing this however, you should make sure that your mattress is totally dry.

 

Bed sheets can be very dusty and can give off an unpleasant odor. If you cannot seem to get rid of the dust mites that are in your mattress, then you should place a sheet over them. This will keep them off of your bed and at the same time keep your bed sheets clean. On top of that, bed sheets and pillow cases can also harbor harmful bugs and mites. In order to get rid of these bugs, you should place plastic sheeting over your mattress at night. This is because it traps moisture in your room and traps the mites as well.

 

If you have pillows and blankets in your bedroom, then you should clean them at least once a week. Find some heavy duty laundry detergent and a soft brush. You should scrub these pillows and blankets thoroughly. While you are at it, you should also vacuum any carpets and floors that are not cleaned on a regular basis.

Read more Mattress Cleaning Tips – Get Rid of Stains and Dust Mites

Mattress Cleaning Tips – Get Rid of Stains and Dust Mites

Every mattress needs some kind of mattress cleaning done from time to time. Whether it is your bed mattress or another kind of mattress, dust and other stuffs are bound to build up in there. Aside from just making the mattress look gross, these unwanted materials can cause serious problems. Aside from being uncomfortable, these materials can also be dangerous. These problems are compounded by the fact that the usual cleaning methods often leave residue behind. You will end up with a mattress that is matted, sticky, and unhealthy.

mattress cleaning

 

During mattress cleaning, you will have to remove all the loose, folded, and/or crumpled sheets on the bed. Wash these sheets individually using warm water and a mild detergent. Remove any blankets, pillows, and covers from the bed. If possible, move the mattress to another room.

 

After you have washed the sheets, use a vacuum cleaner to remove any visible debris on them. Sprinkle some baking soda on the clean sheets, and allow it to sit for approximately 20 minutes. This will kill any bacteria present. It is also important to note that you should only use a mild detergent for this purpose. Using a strong detergent may only cause the problem to worsen.

 

After you have completed the first step, you can proceed with the second one. For your vacuum cleaner, choose either a hand-held unit or an upholstery attachment. For the upholstery attachment, you can either choose a scrub brush or a microfiber attachment. After using the device on both the upholstery attachment and the hand-held unit, you can now proceed to the next step of mattress cleaning. This next task includes removing any remaining dust and dirt from the mattress.

 

For this task, you can either choose a HEPA filter that is designed to remove odors, or purchase an odorless mattress protector. These are designed to cover any remaining odors in the mattress. However, if you find that these products do not work well in removing odors, you can buy an air purifier. By mixing oxygen with plain water, you can create an excellent air purifier that can effectively remove mold and mildew odors from your mattress.

 

After vacuuming your mattresses, you can remove any remaining dust and dirt by hand. Mattresses can accumulate dust and dirt due to the action of people while sleeping. Even after you have cleaned your mattresses, they can still harbor bacteria and mold if they are not properly cared for. As much as possible, you should try to avoid sleeping on your mattresses until they are completely clean. This will ensure that the dust and bacteria will be completely gone.

 

If you have found that your mattress is filled with dust and smells musty, then you should consider using a humidifier. This will help eliminate any dampness that may be present. A humidifier works best when it is mixed with some air. Since air is heavier than water, it sinks to the bottom and helps eliminate odors that float to the top.

 

Aside from replacing your mattresses if they are stained or moldy, there are other methods that you can employ in order to freshen up your mattresses. You can try putting a slice of white bread on your mattress and leaving for several hours. This will rid your mattress of the smell of bread and any other unpleasant odor. You can also try using orange peels. Similar to white bread, orange peels will effectively rid your mattress of their unpleasant odors.

 

If you find that you have bed bugs and you need to clean them up, then you can spray gel or oil cleaner on them. This will effectively kill the bugs and the eggs they lay. You can also use warm soapy water and wash them down on your bed. While you are doing this however, you should make sure that your mattress is totally dry.

 

Bed sheets can be very dusty and can give off an unpleasant odor. If you cannot seem to get rid of the dust mites that are in your mattress, then you should place a sheet over them. This will keep them off of your bed and at the same time keep your bed sheets clean. On top of that, bed sheets and pillow cases can also harbor harmful bugs and mites. In order to get rid of these bugs, you should place plastic sheeting over your mattress at night. This is because it traps moisture in your room and traps the mites as well.

 

If you have pillows and blankets in your bedroom, then you should clean them at least once a week. Find some heavy duty laundry detergent and a soft brush. You should scrub these pillows and blankets thoroughly. While you are at it, you should also vacuum any carpets and floors that are not cleaned on a regular basis.

Read more Mattress Cleaning Tips – Get Rid of Stains and Dust Mites

Are Garden Timber Cabins Water Resistant?

Are garden timber cabins rainproof is a query we got asked all the time here at timberdise garden log cabins.

 

The brief simple answer to your query is an unquestionable yes!

 

Why would they not be?

 

Well, let’s take a look at some of the conceivable issues with a log cabin which would make the timber cabin not rainproof and fairly honestly not fit for purpose.The main thing to seem at as soon as possible is the roof structure, that’s where you would imagine the main problem would commence (this is not always the situation but that’s where we will commence today). The main problem with the roof structure would be to have the felt or shingling to not be mounted correctly. This is fairly easily done if this is something you have never done before and why it should always be carried out by a specialist especially if you are spending a lot of your hard earned cash on a log cabin.

 

• Make certain that the overlies are overliing in the proper way. You should always commence felting at the bottom of the building and felt upwards. By doing this you guarantee that the felt overlies on top of the piece of felt that is further down the roof structure. This will guarantee there is a natural run off of the water, if you commence felting at the top of the roof structure and you put the overlie from the bottom pieces over the top of the felt higher up when the rain works off it will run underneath the felt and consequently lead to a water leak. This is precisely the same when doing shingles, make certain you install from bottom upwards.

 

• Make certain the overlies of the felt/shingles are fairly generous. You don’t want them to be just barely overliing because this could lead to rain to get between the felt sheets and this will lead to a water leak

 

• Make certain you use ample felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of pin in the middle,possibly two rows but again this depends on the quality of the felt. Failure to put enough felt pin in there could result in the felt blowing off during a bad storm which would then leave your building exposed to water leaks.

 

• It is also important that when you reach the overhang of the building with the felt you pin the felt to side of the roof structure but DO NOT tuck the felt underneath the overhang of the roof structure as this limits the natural run off of the water. This can lead to early rotting of the building and in some situations lead to the roof structure to water leak around the top corners of the building as water could build up.

 

• Make certain you use the right size fixings. If the roof boards on your building are let’s say 10mm, you don’t want felt nails of 16mm. Doing this would lead to the felt nails to come completely through the roof structure. This would not seem cosmetically appealing and would also be a real option of a water leak in the building. They way felt is now designed,there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a water leak.

 

• The most frequently forgotten area on a log cabin building is the felt or shingles on the roof structure. This is generally because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is precisely what you should do and I would suggest at least once a year or if you notice a water leak. Because timber cabins are not built as high as the normal house and the felt and shingles aren’t fairly as tough and resilient as a typical house tile they require a little more attention. They are exposed to more elements on a daily basis because they are lower, this can result in a number of things from falling debris from trees, or another instance would be a children’s toys getting thrown up there which would all lead to damage to the felt/shingles. Not to mention lots of bird excrement can rot the felt if it is in an area where natural rain can not pass through it to create a natural run off and cleaning system (for instance if your timber cabin sits under a plant).

 

Timberdise install all of our timber cabins, we do this because we know you are investing a lot of cash into a log cabin and you want it to be around for a long period of time. So the best way we can guarantee this takes place is to take care of the installation and make certain it is mounted correctly. We’ve been out to repair timber cabins in the past built by non-skilled people and if the building is not put together correctly then number one it won’t be safe but also it could lead to a failure in the building to be rainproof.

 

A prime instance of this would be that the logs haven’t been built correctly on the walls. This would then lead to the timber cabin to differ from the design as it was intended to be. At this point when the roof structure was mounted there might be gaps between the roof structure and the wall. Spaces could also appear on the walls of the timber cabins themselves and in some situations if the initial build of the timber cabin was so bad you would have no choice but to take down the timber cabin and reconstruct it.

 

This is why Timberdise Garden Buildings install all of our timber cabins so you don’t have this to worry about. As you can imagine if there is a gap in the wall or a gap between the roof structure and the wall this would leave the log cabin open and it would most definitely water leak which is what we want to avoid at all costs.

 

I also want to bring attention to the flooring a second. Having your timber cabin mounted on a proper ground base is a must. That could be a Timberdise ground base,cement base or a paved area. As long as they’re flat, level and solid you should be ok. Be mindful of where you put the log cabin,don’t put it any place that is at risk of flooding as just like the house that you live in. If the water level rises and there is no getaway for it then the timber cabin will flood,that is regardless of how thick and tight your logs are.

 

Lastly let’s talk about sealants around the windows and doors. Make certain after you have treated your log cabin you fit the relevant sealants around the doors and the windows. The cabins don’t come with these fitted as standard, this is so you can treat the log cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rain could pass through the inside of the log cabin, which again is easily fixed by applying sealants.

 

Also, at times especially during the winter months, condensation can materialize inside a cabin. This is normal due to the cabins not having any insulation fitted, it is not a water leak and can be fairly normal. We recommend at Timberdise to get a dehumidifier if you have electric access in there and leave it working during the chillier months. This will help take water out of the air and further increase the lifespan of your log cabin.

 

If you comply with all the above guidelines you should have a water leak free log cabin for the duration of its lifespan which can offer infinite fulfillment and relaxation. Don’t forget prevention is better than the treatment.

Read more Are Garden Timber Cabins Water Resistant?

Are Garden Timber Cabins Waterproofed?

Are garden log cabins water resistant is a query we got asked all the time here at timberdise garden log cabins.

 

The brief simple answer to your question is a definite yes!

 

Why would they not be?

 

Well, let’s take a look at some of the plausible issues with a log cabin which would make the log cabin not water resistant and quite honestly not fit for purpose.The main thing to appear at immediately is the roof, that’s where you would visualize the main complication would start (this is not always the scenario but that’s where we will start today). The main complication with the roof would be to have the felt or roof shingles to not be placed correctly. This is quite easily done if this is something you have never done before and why it should always be tackled by a qualified professional most especially if you are investing a lot of your hard earned cash on a log cabin.

 

• Make sure that the overlaps are overlapping in the proper way. You should always start felting at the bottom of the structure and felt upwards. By doing this you guarantee that the felt overlaps on top of the piece of felt that is further down the roof. This will guarantee there is a natural run off of the water, if you start felting at the top of the roof and you put the overlap from the bottom pieces over the top of the felt higher up when the rain operates off it will run under the felt and consequently bring about a leakage. This is exactly the same when doing shingles, make sure you install from bottom upwards.

 

• Make sure the overlaps of the felt/shingles are quite generous. You don’t want them to be just barely overlapping because this could bring about rain to get between the felt sheets and this will bring about a leakage

 

• Make sure you use more than enough felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of pin in the middle,possibly two rows but again this depends on the quality of the felt. Failure to put enough felt pin in there could result in the felt blowing off during a bad storm which would then leave your structure exposed to leakages.

 

• It is in addition important that when you reach the overhang of the structure with the felt you nail the felt to side of the roof but DO NOT tuck the felt under the overhang of the roof as this limits the natural run off of the water. This can bring about early rotting of the structure and in some situations bring about the roof to leakage around the top corners of the structure as water could build up.

 

• Make sure you use the right size fixings. If the roof boards on your structure are let’s say 10mm, you don’t want felt nails of 16mm. Doing this would bring about the felt nails to come completely through the roof. This would not appear cosmetically pleasing and would in addition be a real opportunity of a leakage in the structure. They way felt is now designed,there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a leakage.

 

• The most generally overlooked area on a log cabin structure is the felt or shingles on the roof. This is typically because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is exactly what you should do and I would encourage at least once a year or if you notice a leakage. Because log cabins are not built as high as the normal house and the felt and shingles aren’t quite as tough and resilient as a typical house tile they require a little more attention. They are exposed to more elements on a daily basis because they are lower, this can result in a number of things from falling debris from plants, or another example would be a kids’s toys getting thrown up there which would all bring about damage to the felt/shingles. Not to mention lots of bird excrement can rot the felt if it is in an area where natural rain can not permeate it to create a natural run off and cleaning system (for example if your log cabin sits under a plant).

 

Timberdise install all of our log cabins, we do this because we know you are investing a lot of cash into a log cabin and you want it to be around for a long period of time. So the best way we can guarantee this happens is to take care of the installation and make sure it is placed correctly. We’ve been out to repair log cabins in the past built by non-skilled people and if the structure is not put together correctly then number one it won’t be safe but in addition it could bring about a failure in the structure to be water resistant.

 

A prime example of this would be that the timbers haven’t been assembled correctly on the walls. This would then bring about the log cabin to differ from the design as it was intended to be. At this point when the roof was placed there might be gaps between the roof and the wall. Gaps could in addition appear on the walls of the log cabins themselves and in some situations if the initial build of the log cabin was so bad you would have no choice but to take down the log cabin and reconstruct it.

 

This is why Timberdise Garden Buildings install all of our log cabins so you don’t have this to worry about. As you can visualize if there is a void in the wall or a void between the roof and the wall this would leave the log cabin open and it would most definitely leakage which is what we want to avoid at all costs.

 

I in addition want to bring attention to the floor surface a second. Having your log cabin placed on a proper ground base is a must. That could be a Timberdise ground base,cement base or a paved area. As long as they’re flat, level and solid you should be ok. Be mindful of where you put the log cabin,don’t put it at any place that is at risk of flooding as just like the house that you live in. If the water level rises and there is no getaway for it then the log cabin will flood,that is regardless of how thick and tight your timbers are.

 

Lastly let’s talk about sealants around the windows and doors. Make sure after you have treated your log cabin you fit the relevant sealants around the doors and the windows. The log cabins don’t come with these fitted as standard, this is so you can treat the log cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rain could permeate the inside of the log cabin, which again is easily fixed by applying sealants.

 

Additionally, in some cases most especially during the winter months, condensation can materialize inside a cabin. This is normal due to the log cabins not having any insulation fitted, it is not a leakage and can be quite normal. We encourage at Timberdise to get a dehumidifier if you have electric access in there and leave it running during the chillier months. This will help take humidity out of the air and further increase the life of your log cabin.

 

If you comply with all the above recommendations you should have a leakage free log cabin for the duration of its life which can supply endless enjoyment and relaxation. Don’t forget prevention is far better than the treatment.

Read more Are Garden Timber Cabins Waterproofed?

Tips for Purchasing Dining Chairs

Selecting the very best dining chairs for your dining table is not a simple choice. If you’re holding supper celebrations sometimes,or simply having supper with your family every night,then relaxing dining chairs are a needs to for your home. However with many options to choose from– design,form,armrests,and more– it’s difficult to ensure you’re making the ideal purchase.

Let’s start with the most traditional dining chair arrangements. There are 3 primary styles of dining chairs:

All Matching Chairs

The most traditional dining room chair setup consists of 2 or 3 identical dining chairs organized around the table.

Head and Side Chair Mix

Some dining rooms will have 2 staging seats dealing with each other at the head and completion of the table. 4 or 5 side chairs are then placed in between the two heads around the wall. This dining chair plan only fits in dining rooms with rectangular table.

Mismatched Chairs

For an unique style,you may pick a set of unrivaled dining chairs. This choice fits well in industrial-style dining rooms and bohemian-style dining rooms. Each chair needs to be unique for this setup.

Beyond these 3 setups,you can also use non-conventional seating options,such as benches that are ideal for children,depending on your preferences.

Tips for Purchasing

My biggest tip for purchasing table is to weigh whatever prior to purchasing! Make certain you leave enough arm and leg space at your dining table for any visitor you like,especially when you pick chairs.

The guideline is: 10 inches of leg range (area in between the seat and the dining table) and 2 feet of table area for each visitor at your table.

You can also enable a minimum of 2 feet of void to sit behind each visitor at your dining table.

Styles

There are a lot of dining chairs available for any kind of home decoration imaginable. Here are a number of concepts:

Farmhouse dining chairs

Industrial dining chairs

Mid-century contemporary periodic dining chairs

Bohemian dining chairs

Coastal dining chairs

Scandinavian dining chairs

Dining armchairs

Materials

Dining chairs,like many pieces of furniture come in a variety of products nowadays. As the saying goes: you get what you spend for. There’s absolutely nothing wrong with buying lower expense items made from artificial products,however do not be shocked when you require to replace them after a year or 2.

The most common dining chair products are:

Wood

Wood is the most common material used to produce furniture. Left in its natural state,wooden dining chairs will offer a farmhouse or a rustic feel to your space.

Rattan

Rattan is the favorite material for occasional chairs in the coastal or bohemian home. The palm-based material is light-weight and still robust.

Plastic

Plastic is a perfect choice for children’s houses,as plastic can be quickly cleaned. Plastic dining chairs are also light-weight,making them simple to pick and use in other areas of your home.

Metal

Metal dining chairs are generally used in industrial-style dining rooms. They may be partially made from wood. You ought to include a sheepskin toss or purchase a seat cushion to make them more comfy. Tolix chairs are a traditional metal dining chair.

Read more Tips for Purchasing Dining Chairs

How to Build an Athletic Fence with Sports Sheeting

#TITLE#How to Build an Athletic Fence with Sports Sheeting#/TITLE#

Whenever you hear or read about a professional team exploring the possibility of relocating to another city, the desire for a new arena is often the principal reason. A sparkling new stadium filled with modern amenities attracts fans in droves — which generates significant revenues for the team and the regional businesses that surround the facility such as pubs, restaurants, hotels and retail stores. The NFL’s Oakland Raiders are the most recent instance of a game’s team making a move in search of greener pastures. Playing from the antiquated Oakland Coliseum, which was constructed over 50 years back, the team generated a mere $69 million in stadium revenues in 2015, according to Forbes magazine. By comparison, the Dallas Cowboys, playing at the pristine, state-of-the-art AT&T Stadium, raked in over $440 million. Not able to get financial support to build a new stadium in Oakland, the team’s ownership sought and obtained approval from the league to move to Las Vegas, where it will play at a recently assembled 65,000-seat domed stadium (price tag: $1.9 billion) tentatively scheduled for completion in 2020. Annual revenue projections for the new facility range from $250-$350 million.

ChampionWall athletic fencing  

THE EVOLUTION OF THE SPORTS STADIUM

While the origins of the sports arena can be traced to the early Greeks, the first modern facilities were constructed in the mid-to-late 19th century. These sport venues were designed with practicality in mind — the goal was to hold as many spectators as possible, and amenities were virtually non-existent. The majority of these early structures were single-purpose facilities constructed mainly of wood, several of which were ultimatelydestroyed by fire. Goodison Park, a Liverpool, England soccer stadium that opened in 1892, was the first sports facility to incorporate a concrete-and-steel construction. The tendency of single-purpose stadiums continued through much of the 20th century. Facilities such as Fenway Park in Boston, which opened in 1912, and Ebbets Field in Brooklyn and Wrigley Field in Chicago, both of which were finished in 1914, were especially built for baseball. Designed to blend into the surrounding city areas, these facilities featured comparatively little seating capacities and provided fans with an intimate, up-close ballpark experience that nearly made them feel as if they were part of the action.

THE BIRTH OF THE MULTIPURPOSE STADIUM

The post-World War II migration of Americans from the city to the suburbs combined with the increase in popularity of professional football resulted in the arrival of the multipurpose sports arena concept, which served as the model for those facilities constructed during the 1960s and 1970s. Designed for both football and baseball, these round, symmetrical concrete facilities were typically constructed in suburban areas and provided easy access by interstate highway. Spacious parking lots were alsorequired to accommodate the heavy vehicle traffic, since these facilities were inaccessible via the towns’ mass transit systems. Examples of the multipurpose stadium concept included Robert F. Kennedy Memorial Stadium in Washington, D.C.; Veterans Stadium in Philadelphia; Three Rivers Stadium in Pittsburgh; Atlanta-Fulton County Stadium; and Jack Murphy Stadium in San Diego. The Houston Astrodome, which opened in 1965, was the world’s first multipurpose stadium to feature a domed roof and an artificial turf field.

THE RETURN TO THE SINGLE-PURPOSE STADIUM CONCEPT

While multipurpose stadiums offered the benefit of practicality and flexibility, the uninspired cookie-cutter design featured in most of these facilities eventually fell out of favor with spectators, particularly old-school baseball fans who longed for a return to the local ballpark feel and look. This caused the development of the retro-classic concept inspired by older facilities such as Wrigley Field and Fenway Park. The first of the retro-classic ballparks was Oriole Park at Camden Yards in Baltimore. Completed in 1992, Camden Yards rests on the website of an old B&O railroad yard in South Baltimore and features a sprawling, 1,100-foot-long, eight-story refurbished railroad warehouse for a backdrop. Other stadiums inspired by the Camden Yards model include Progressive Field in Cleveland, PNC Park in Pittsburgh, Citizens Bank Park in Philadelphia, AT&T Park in San Francisco and Miller Park in Milwaukee. These facilities combine the retro look and feel with all the modern features and amenities necessary to meet the requirements of the 21st-century sports fan. These brand new baseball stadiums include expansive scoreboards and video replay screens, as well as natural grass or artificial turf fields that are softer than artificial turf.

CURRENT AND FUTURE STADIUM DESIGN TRENDS

 

aluminum pilings  

While the traditional stadium design catered to families, modern stadiums to appeal to the 18-to-34-year-old demographic. These younger individuals view going to a sporting event as a total entertainment experience that entails much more than watching a ball game. The design of newer facilities typically incorporates features such as pedestrian malls, entertainment plazas and concourses situated outside the arena that allow fans to dine, shop and socialize before and after the match. Now’s facilities also feature numerous seating environments that extend well beyond the standard stadium seat in the middle of a crowded row of spectators. Premium seating options include private suites that resemble living rooms and can accommodate 10-15 fans. These suites include a private entrance from the arena concourse and also have attributes such as buffets, bars, television screens and computers with Internet access. Some stadiums even provide field suites situated in the front row that place fans directly on top of the action. Stadium amenities also have come a long way, concerning the variety of food options. In addition to the hot dog, beer and bag of peanuts, most stadiums provide a broad assortment of high-end cuisine and craft beers and wine to cater to a younger, upscale crowd. Menu options at AT&T Stadium in Dallas, widely regarded as the crown jewel of NFL facilities, include everything from chicken fried quail into a brisket sandwich on pretzel bread smothered in melted onions, piquillo peppers and melted cheddar cheese. While the prevalence of single-purpose stadiums continues, there are signs of an eventual return to the multipurpose concept. According to John Rhodes, Director of Sports, Recreation and Entertainment in the London office of HOK, the architectural company largely responsible for creating the Camden Yards concept, the multipurpose design was gaining traction across Europe over the last ten years. Rhodes indicates there is a growing shift toward creating more civic-type facilities that can host a wide array of sporting and community events. Sustainability has also become a vital element in all new arena projects to comply with LEED requirements. In a recent StarTalk Radio episode, Stadiums of the Future, Neil deGrasse Tyson dives into modern arena designs and technology with co-hosts Gary O’Reilly and Chuck Nice and Benjamin Brillat of IBM Sports. Bejamin Brillat discusses how these improvements start right from when the stadium is only a hole in the ground. They bury the conduit from the concrete before it gets poured. Future designs won’t only change the way fans experience a game, but it could also change the sport.

composite deck boards  

Read more

How to Build an Athletic Fence with Sports Sheeting

How to Build an Athletic Fence with Sports Sheeting

#TITLE#How to Build an Athletic Fence with Sports Sheeting#/TITLE#

Whenever you read or hear about a professional team researching the possibility of relocating to another town, the desire for a new stadium is often the primary reason. A sparkling new stadium full of modern amenities attracts fans in droves — and that generates significant revenues for the group and the local businesses that surround the facility such as bars, restaurants, hotels and retail stores. The NFL’s Oakland Raiders are the latest instance of a sport’s team making a move in search of greener pastures. Playing in the antiquated Oakland Coliseum, which was constructed over 50 years back, the group generated a mere $69 million in stadium revenues in 2015, according to Forbes magazine. By comparison, the Dallas Cowboys, playing at the immaculate, state-of-the-art AT&T Stadium, raked in over $440 million. Unable to get financial support to build a new stadium in Oakland, the team’s possession sought and obtained approval from the league to move to Las Vegas, where it will play at a recently assembled 65,000-seat domed stadium (price tag: $1.9 billion) tentatively scheduled for completion in 2020. Annual revenue forecasts for the new facility range from $250-$350 million.

[dcl=8658]  

THE EVOLUTION OF THE SPORTS STADIUM

While the origins of this sports stadium can be traced to the ancient Greeks, the first modern facilities were built in the mid-to-late 19th century. These game venues were designed with practicality in mind — the goal was to hold as many audiences as possible, and amenities were virtually non-existent. The majority of these ancient structures were single-purpose facilities constructed mainly of wood, several of which were destroyed by fire. Goodison Park, a Liverpool, England soccer stadium that opened in 1892, was the first sports facility to feature a concrete-and-steel construction. The tendency of single-purpose stadiums continued through much of the 20th century. Facilities such as Fenway Park in Boston, which opened in 1912, and Ebbets Field in Brooklyn and Wrigley Field in Chicago, both of which were completed in 1914, were especially built for baseball. Designed to blend into the surrounding city neighborhoods, these facilities featured relatively small seating capacities and provided fans with a romantic, up-close ballpark experience that almost made them feel as if they were part of the action.

THE BIRTH OF THE MULTIPURPOSE STADIUM

The post-World War II migration of Americans from the city to the suburbs combined with the increase in popularity of professional football led to the arrival of the multipurpose sports stadium concept, which served as the model for the facilities constructed during the 1960s and 1970s. Designed for both football and baseball, these circular, symmetrical concrete facilities were typically constructed in suburban areas and offered easy access by interstate highway. Spacious parking lots were required to accommodate the heavy vehicle traffic, since these facilities were inaccessible through the cities’ mass transit systems. Examples of this multipurpose stadium concept included Robert F. Kennedy Memorial Stadium in Washington, D.C.; Veterans Stadium in Philadelphia; Three Rivers Stadium in Pittsburgh; Atlanta-Fulton County Stadium; and Jack Murphy Stadium in San Diego. The Houston Astrodome, which opened in 1965, was the world’s first multipurpose stadium to feature a domed roof and an artificial turf field.

THE RETURN TO THE SINGLE-PURPOSE STADIUM CONCEPT

While multipurpose stadiums offered the advantage of practicality and versatility, the uninspired cookie-cutter design featured in the majority of these facilities eventually fell out of favor with audiences, particularly old-school baseball fans who longed for a return to the neighborhood ballpark look and feel. This led to the growth of the retro-classic concept inspired by older facilities such as Wrigley Field and Fenway Park. The first of this retro-classic ballparks was Oriole Park at Camden Yards in Baltimore. Completed in 1992, Camden Yards rests on the site of an old B&O railroad yard in South Baltimore and comes with a sprawling, 1,100-foot-long, eight-story refurbished railroad warehouse as a backdrop. Other stadiums motivated by the Camden Yards model include Progressive Field in Cleveland, PNC Park in Pittsburgh, Citizens Bank Park in Philadelphia, AT&T Park in San Francisco and Miller Park in Milwaukee. These facilities combine the retro look and feel with all the modern features and amenities necessary to fulfill the demands of the 21st-century sports enthusiast. These new baseball stadiums include expansive scoreboards and video replay screens, as well as natural grass or artificial turf fields that are softer than artificial turf.

CURRENT AND FUTURE STADIUM DESIGN TRENDS

 

[dcl=8599]  

While the traditional stadium design catered to families, modern stadiums to appeal to the 18-to-34-year-old demographic. These younger people view going to a sporting event as a whole entertainment experience that entails far more than watching a ball game. The design of newer facilities typically incorporates features such as pedestrian malls, entertainment plazas and concourses situated outside the stadium that allow fans to dine, shop and socialize before and after the match. Now’s facilities also feature numerous seating environments that extend well beyond the standard stadium seat in the middle of a crowded row of spectators. Premium seating options include private suites that resemble living rooms and can accommodate 10-15 fans. These suites include a private entrance from the stadium concourse and also have attributes such as buffets, bars, television screens and computers with Internet access. Some stadiums even offer field suites situated in the front row that place fans directly on top of the action. Stadium amenities also have come a long way, regarding the variety of food choices. Along with the hot dog, beer and bag of peanuts, most stadiums offer a broad assortment of luxury cuisine and craft beers and wine to appeal to a younger, upscale crowd. Menu choices at AT&T Stadium in Dallas, widely regarded as the crown jewel of NFL facilities, include everything from chicken fried quail into a brisket sandwich on pretzel bread smothered in melted onions, piquillo peppers and melted cheddar cheese. While the popularity of single-purpose stadiums continues, there are signs of an eventual return to the multipurpose concept. According to John Rhodes, Director of Sports, Recreation and Entertainment in the London office of HOK, the architectural company largely responsible for producing the Camden Yards concept, the multipurpose design was gaining traction across Europe over the past decade. Rhodes suggests there is an increasing shift toward developing more civic-type facilities that can host a wide range of sporting and community events. Sustainability has also become a critical element in all new stadium projects to comply with LEED requirements. In a recent StarTalk Radio episode, Stadiums of the Future, Neil deGrasse Tyson dives into modern stadium designs and tech with co-hosts Gary O’Reilly and Chuck Nice and Benjamin Brillat of IBM Sports. Bejamin Brillat discusses how these advancements start right from once the stadium is only a hole in the ground. They bury the conduit in the concrete before it gets poured. Future designs will not only change the way fans encounter a game, but it might also change the sport.

[dcl=8355]  

Read more

How to Build an Athletic Fence with Sports Sheeting

Tips for Buying Dining Chairs

Picking the very best dining chairs for your table is not a straightforward choice. If you’re holding supper parties often,or simply having supper with your household every night,then comfortable dining chairs are a needs to for your house. But with many choices to choose from– design,type,armrests,and more– it’s tough to make certain you’re making the right purchase.

Let’s begin with the most conventional dining chair arrangements. There are 3 primary designs of dining chairs:

All Matching Chairs

The most conventional dining room chair configuration includes two or 3 identical dining chairs set up around the table.

Head and Side Chair Mix

Some dining rooms will have two staging seats dealing with each other at the head and completion of the table. Four or 5 side chairs are then placed between the two heads around the wall. This dining chair arrangement only suits dining spaces with rectangle-shaped table.

Mismatched Chairs

For an exotic style,you might select a set of unrivaled dining chairs. This choice fits well in industrial-style dining rooms and bohemian-style dining rooms. Each chair needs to be special for this configuration.

Beyond these 3 setups,you can also utilize non-conventional seating choices,such as benches that are perfect for children,depending on your choices.

Tips for Purchasing

My biggest idea for purchasing table is to weigh whatever prior to purchasing! Ensure you leave enough limb space at your table for any visitor you like,particularly when you select chairs.

The guideline is: 10 inches of leg range (space between the seat and the table) and 2 feet of table space for each visitor at your table.

You can also enable at least two feet of void to sit behind each visitor at your table.

Styles

There are a lot of dining chairs available for any type of house decoration imaginable. Here are a number of concepts:

Farmhouse dining chairs

Industrial dining chairs

Mid-century modern-day occasional dining chairs

Bohemian dining chairs

Coastal dining chairs

Scandinavian dining chairs

Dining armchairs

Products

Dining chairs,like many furniture pieces can be found in a range of products nowadays. As the saying goes: you get what you spend for. There’s absolutely nothing incorrect with buying lower expense items made from artificial products,however do not be shocked when you require to change them after a year or two.

The most common dining chair products are:

Wood

Wood is the most common material utilized to produce furnishings. Left in its natural state,wooden dining chairs will offer a farmhouse or a rustic feel to your space.

Rattan

Rattan is the preferred material for occasional chairs in the coastal or bohemian house. The palm-based material is light-weight and still robust.

Plastic

Plastic is a best choice for kids’s houses,as plastic can be quickly washed. Plastic dining chairs are also light-weight,making them easy to select and utilize in other areas of your house.

Metal

Metal dining chairs are normally utilized in industrial-style dining rooms. They might be partially made of wood. You should add a sheepskin throw or buy a seat cushion to make them more comfortable. Tolix chairs are a conventional metal dining chair.

Read more Tips for Buying Dining Chairs

Opening a Cat Cafe – A Fun Experience For the Family

Opening a Cat Cafe – A Fun Experience For the Family

cat cafe

For the uninformed,The Cat Cafe may seem quite difficult to locate,but once inside the bright and spacious studio,it’ll be well worth your effort. The interior is minimalist,yet warm and inviting. With two small dining areas,a cafe table,and a few plush cat beds scattered about,The Cat Cafe is ideal for an evening with friends or a quick break from home. What’s more,the place is open later nights for breakfast as well as snack food. And best of all,no one seems to mind – at least when I’m around.

So,just what is it about The Cat Cafe that makes it such a popular name in the local Singapore communities? According to the people at the cafe,many cats are abandoned each night on the north bridge Road. Some are hit by cars,others get lost in the maze of alleys and pathways,and still others are simply stolen for their shiny fur. When the owners return from their trips,they leave their feline companions along the road,an invitation to thieves and opportunists. To prevent this problem,The Cat Cafe has decided to offer some much-needed respite from the bustle of the everyday world by setting up their very own cat cafe on the north bridge road.

And why should cat cafe enthusiasts visit The Cat Cafe,rather than some other places in Singapore? For one thing,the ambiance is distinctly different from most of the cafes dotting the city. The laid back atmosphere invites visitors with gentle music and a friendly atmosphere. You could even say that the cafe symbolises the best of old and new Singapore. Since opening its doors in February last year,the cat cafe has received a steady influx of enthusiastic pet lovers.

The Cat Cafe offers three different kinds of meals a day. They serve chicken Kow Ram in morning,Mango chicken in the afternoon,and spicy beef in the evening. The unique atmosphere draws a steady stream of visitors through the week. Even during the holidays,people from far off visited the place to enjoy a well-balanced diet of fresh fruits,homemade cakes,and desserts. They were rewarded when the cat cafe opened its doors to the public in December last year.

According to the latest statistics,over a hundred and sixty-five cats are taken care of at these establishments. Of these,about twenty-five are shelter pets,while the rest are abandoned or lost. The Cat Cafe realised the importance of introducing these cats to people who do not know them and could adopt them. By setting up their own cat cafes,the volunteers hope that by adopting these unwanted animals,they help to save more future cat rescues.

In fact,The Cat Cafe’s rescue mission is not the only one being undertaken by the volunteer organisations. Since last March,thousands of stray and abandoned cats have been placed for adoption at the centres. The idea behind the first cat cafe in Singapore is to provide loving homes for these poor animals. To date,the cat cafe is open for three hours on Friday,Saturday and Sunday.

The idea of opening a cat cafe is catching on fast. So far,there are over twenty cat cafes operating in the city. If you are looking to set up your own cafe soon,then the best time to start is during the Chinese New Year from January to February. On that time,most of the streets around the central business district are cleaned up for the Chinese festival,so you will find many empty storefronts.

Read more Opening a Cat Cafe – A Fun Experience For the Family

Does Creatine Go Bad?

Does Creatine Go Bad?

does creatine go bad

It’s only after a few months into eating creatine that many of us will finally realize that lots of the stuff we’ve been putting on our body has been sitting there on the shelf,while all we’re probably wondering is does creatine go bad. And trust us,it actually does happen to just about every one of us. But don’t fret,just have come to you this short article which will enlighten you all about this. First off,what exactly is creatine and what does it do for us? Well,if you want to know the answer to that question then read on!

Creatine is a substance that’s found naturally in our bodies and is composed of three amino acids,G Glutamine,Glycine,and Ethyl Ester. The great thing about creatine powder is that it’s easily stored in our muscles,and as such we can replenish our body’s supply with little effort. That is until the day that we decide to try and eat some creatine. What happens then is that most of us tend to eat way more than we should,and this causes the creatine in our body to become depleted.

This leads to us wanting to either throw the entire bottle away,or attempt to find a way to replenish our body’s supply of creatine. So the question now becomes “does creatine monohydrate still use”. The answer,fortunately for us,is yes! The problem is however,that this doesn’t mean that we can now go ahead and enjoy a glass of cola while we work out,because unless we still use the powder in our muscles then nothing will actually be stored within them.

So if we want to know does creatine go bad,we first need to understand how the supplement works. Creatine is basically a naturally occurring substance within our bodies,which is used to create energy. When taken,it gives an increased amount of energy. It also makes the muscles which have been worked out more vigorously feel so much better,meaning that they work for longer before succumbing to fatigue. The problem with creatine however,is that once the protein powder has expired,the supplement itself no longer has any of its benefits.

So when you first open up a bottle of creatine,or some kind of protein powder go bad,there’s not a great deal that you can do to recapture the benefits. Most of the chemical reactions which take place inside the body have a limit to how long they last. Once,the expiry date rolls around,these chemical reactions stop functioning. If there was ever a time in our lives when we could possibly do something to prolong the effects of those chemical reactions,it would be upon the expiration date.

Now,while we can’t prevent the expiration date from rolling around in our minds,we do have a lot of ways in which we can try to keep the supplements from expiring. Of course,one of these ways is to keep them away from heat and light,as both of these can speed up the chemical reactions that take place within our bodies. However,this isn’t always possible. In addition to this,most protein powders are going to be exposed to air and light. These two factors are actually known for shortening their shelf life considerably,meaning that if you were to keep them stored in a dark cupboard,there’s a good chance that they’re going to expire much sooner than the official expiration date which appears on the bottle.

To protect yourself against expiring creatine too soon,it’s highly advisable that you keep your supplements away from heat and light whenever you possibly can. This is especially important if you’re taking creatine in a nutritional supplement form. It’s widely available in the health food store and vitamin supplement section. If you feel that you might need to use creatine in this way,you should ask your doctor first before you begin taking it,as some health professionals believe that pregnant women shouldn’t take it or use it while they’re pregnant.

When it comes to using creatine,the main concern is whether or not it will go bad when it’s opened. If a bottle of creatine has been kept open for quite some time without being used,it’s obviously going to go bad,regardless of how long it’s been open. If you want to make sure that you won’t have any problems with your protein powder,you should either store it away until it’s opened or throw it away once it’s opened. It really depends on how you feel about the idea of potentially destroying something that could potentially be healthy for you.

Read more Does Creatine Go Bad?

How to Deal With Beta Fish Tumors

How to Deal With Beta Fish Tumors

Fish tumors are tumors that develop in the fins of the fish. This can be a very dangerous type of tumor,because it can grow large enough to become an obstruction for the swim bladder. Swim bladders are the organ that cleansing oxygen from the body,and when this happens,the fish risks drowning and damage to other organs can occur. The type of fish tumor can change from one fish to another depending on what kind of fish is involved. The risk of developing this kind of tumor increases with age because the fish has a decreased ability to filter toxins out of its body.

beta fish tumors

The best way to prevent beta fish tumors is by never keeping any fish with a history of these tumors. However,if you already have two or more beta fish in your pond then you need to get rid of them as soon as possible. Tumors that are malignant tend to spread and can even cause death. Malignant tumors in any fish should be taken to a veterinarian right away for proper care.

If you have one or more beta fish tumors,there are some things that you can do to help prevent the growth of the tissue. Treatment options depend on the size of the fish. Larger fish tend to be more difficult to treat and treatment options will generally be more expensive. A lot of time,it takes just a few months before you can get your fish back into the water. Fish with large tumors can usually only be put back after surgery.

Treatment options for beta fish tumors range from very effective to not effective. Tumors that are not very large will usually dissolve within a month or two. If the tumors are very large then it will usually take six months to a year before you can get them removed surgically. However,once removed they can potentially live for ten years in a pond full of oxygen.

If your fish is showing signs of weakness,loss of appetite,decreased ability to fight off disease,changes in the appearance of the gills,and swim bladder dysfunction then your fish may be at risk of tumors. If you suspect that your fish is sick or dying then get them to a veterinarian as soon as possible. Tumors rarely disappear on their own. They will usually grow in size over the next couple months before they begin to cause physical problems. You should consider removing your fish from the water if a tumor is growing significantly larger than the size of the fish.

Treatment options vary depending on the type of tumor you are dealing with. Larger tumors are often treated by cutting the fish into two pieces and putting each piece through a surgical gauntlet. This cuts the air sacs and causes the blood flow to increase. This will usually cause the tumor to shrink. Surgery is not guaranteed to prevent the growth of additional tumors in future fish,but it will greatly improve the odds of future fish disease.

If you suspect that your fish is suffering from a tumor due to an infection (bacterial or fungal),then there are a couple of treatments you can try. These treatments include giving your fish a course of antibiotics,which should help to clear up the bacterial infection. The advantage of this treatment is that it is quick and easy. If you notice that the tumors are coming back or the fish is exhibiting other symptoms of an infection then you should consider hospitalizing your fish until you can get to them.

Treatment of beta fish tumors should be done carefully because any mistake in surgery could cause permanent damage to the lobe or fin. In particular,a tympanic liposuction could cause internal bleeding,internal swelling and scarring. Careful removal techniques should also be used. You can minimize the likelihood of having to do surgery by keeping your fish as calm and relaxed as possible. A calm and relaxed fish is less likely to suffer from stress induced diseases.

Read more How to Deal With Beta Fish Tumors

Can Pregnant Women Eat Crab Rangoon?

Can Pregnant Women Eat Crab Rangoon?

can pregnant women eat crab rangoon

Is it safe to eat crabs in pregnancy? Yes,you can but only with the advice of a professional. Before we discuss that,let’s look at what crab is all about. Crabs are members of the hermit family that include lobsters,crabs and squids. Hermit crabs are crustaceans that usually have soft abdomens,no bony plates (which means they lack nails) and live in muddy or seaweed areas.

There are different species of hermit crabs but the common ones are Cephalopods,Hymenocera,Alligator Hermit Crabs (also known as “roasted hermit” or “box crab”) and the Maine Coon Crab. These crabs are carnivores and omnivores,which means that they eat both meat and vegetable matter. As far as whether crabs are safe to eat during pregnancy,it usually safe if they are fresh. Although this is true,cooked or treated meat or fish can sometimes be contaminated with bacteria or toxins that can harm the fetus.

If you want to learn the answer to the question “can pregnant women eat seafood safe”? here is the short answer: Yes, it is safe if you cook the crab before eating it. If you just saute the crab right on the pot,then it is safe to eat. However,if you have any doubts about whether or not the crab was cooked properly,you should ask your cook to make sure it was.

You can use canned or fresh crabs instead of real crab sticks,cooked or uncooked. You can also use dried imitation crab sticks. Just drain the can or bottle of seafood dressing and pour the prepared imitation crab mix into your pot or directly onto the damp surface of your pot. Just add enough water so that the liquid sinks to the bottom.

The next question you might ask is: can pregnant women eat fish that has been polluted by drugs or other chemicals? If you consume any type of seafood that has been injected with any type of chemicals,even a cheap imitation of seafood,it can cause problems for your pregnancy. This includes fish that contains mercury,which can cause neurological damage or birth defects.

When considering can pregnant women eat seafood that is prepared using seafood byproducts,you must take into consideration food safety guidelines. First,you need to make sure that the “pesticide” content is low. Next,you must ensure that the seafood in question does not contain the “mystery ingredient”. The last thing you want to discover after investing in this “pesticide free” product is that your infant will develop food poisoning,or worse,birth defects. You want to learn the difference between contaminated shrimp or lobster.

Although you can eat cooked crab that has been pasteurized,chances are it was already undercooked. Cooking crabs in water that hasn’t been heated above 120 degrees will kill the bacteria in the meat. Cooking crab that has been slightly boiled will kill any harmful bacteria,but you still need to be careful cooking crab that has been undercooked or was exposed to high temperatures. The same is true for cooked lobster that has been lightly steamed; although this will reduce the chemical content,it will also reduce the flavor and texture.

It is also very important to avoid all dairy products while you are pregnant,especially if you happen to be a seafood lover! While some people may thrive on dairy products,pregnant women should avoid all dairy products to keep their bodies healthy. This includes cottage cheese,ice cream,and even yogurt. Seafood can be safe if it’s been prepared by a professional chef,and you don’t have to avoid all forms of seafood in order to stay healthy. There are many healthy seafood choices that are safe for pregnant women to eat,so long as they’ve been smart about the preparation.

Read more Can Pregnant Women Eat Crab Rangoon?

Are Garden Timber Cabins Watertight?

Are garden timber cabins rainproof is a question we got asked all the time here at Timberdise Garden Buildings.

The brief simple answer to your question is a definite yes!

Why would they not be?

Well,let’s take a look at some of the likely problems with a timber cabin which would make the timber cabin not rainproof and fairly honestly not fit for purpose.The main thing to look at quickly is the roof,that’s where you would imagine the main trouble would begin (this is not always the scenario but that’s where we will begin today). The main trouble with the roof would be to have the felt or shingling to not be set up properly. This is fairly easily done if this is something you have never done before and why it should always be tackled by a specialist most especially if you are putting in a lot of your hard earned cash on a timber cabin.

• Make sure that the overlies are overliing in the proper way. You should always begin felting at the bottom of the construction and felt upwards. By doing this you guarantee that the felt overlies on top of the piece of felt that is further down the roof. This will guarantee there is a natural run off of the water,if you begin felting at the top of the roof and you put the overlie from the bottom pieces over the top of the felt higher up when the rain operates off it will run beneath the felt and therefor cause a leak. This is just exactly the same when doing shingles,make sure you mount from bottom upwards.

• Make sure the overlies of the felt/shingles are fairly generous. You don’t want them to be just barely overliing because this could cause rainwater to get between the felt sheets and this will cause a leak

.• Make sure you use sufficient felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of nails in the middle,possibly two rows but again this depends on the quality of the felt. Failure to put enough felt nails in there could result in the felt blowing off during a bad storm which would then leave your construction subjected to water leaks.

• It is additionally important that when you reach the overhang of the construction with the felt you pin the felt to side of the roof but DO NOT tuck the felt beneath the overhang of the roof as this limits the natural run off of the water. This can cause premature rotting of the construction and in some scenarios cause the roof to water leak around the top corners of the construction as water could build up.

• Make sure you use the right size fixings. If the roof boards on your construction are let’s say 10mm,you don’t want felt nails of 16mm. Doing this would cause the felt nails to come completely through the roof. This would not look cosmetically pleasing and would additionally be a real chance of a leak in the construction. They way felt is now designed,there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a leak.

• The most generally forgotten area on a timber cabin construction is the felt or shingles on the roof. This is normally because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is just exactly what you should do and I would encourage at least once a year or if you notice a leak. Because timber cabins are not built as high as the normal house and the felt and shingles aren’t fairly as tough and sturdy as a normal house tile they require a little more focus. They are subjected to more elements on a daily basis because they are lower,this can result in a number of things from falling debris from trees,or another instance would be a children’s toys getting thrown up there which would all cause damage to the felt/shingles. Not to mention lots of bird droppings can rot the felt if it is in an area where natural rainwater can not penetrate it to create a natural run off and cleaning system (for instance if your timber cabin sits under a tree).

Timberdise Garden Buildingsmount all of our timber cabins,we do this because we know you are investing a lot of cash into a timber cabin and you want it to be around for a long period of time. So the best way we can guarantee this occurs is to take care of the installation and make sure it is set up properly. We’ve been out to repair timber cabins in the past built by non-skilled people and if the construction is not put together properly then number one it won’t be safe but additionally it could cause a failure in the construction to be rainproof.

A prime instance of this would be that the timbers haven’t been built properly on the walls. This would then cause the timber cabin to differ from the design as it was intended to be. At this point when the roof was set up there might be spaces between the roof and the wall. Voids could additionally appear on the walls of the timber cabins themselves and in some situations if the initial build of the timber cabin was so bad you would have no choice but to take down the timber cabin and reconstruct it.

This is whyView our products mount all of our timber cabins so you don’t have this to worry about. As you can imagine if there is a gap in the wall or a gap between the roof and the wall this would leave the cabin open and it would most definitely water leak which is what we want to avoid at all costs.

I additionally want to bring focus to the floor a second. Having your timber cabin set up on a proper ground base is a must. That could be a Timberdise ground base,cement base or a paved area. As long as they’re flat,level and solid you should be ok. Be mindful of where you put the cabin,don’t put it any place that is at risk of flooding as just like the house that you live in. If the water level rises and there is no getaway for it then the timber cabin will flood,that is regardless of how thick and tight your timbers are.

Lastly let’s talk about sealants around the windows and doors. Make sure after you have treated your cabin you fit the relevant sealants around the doors and the windows. The cabins don’t come with these fitted as standard,this is so you can treat the cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rainwater could penetrate the inside of the cabin,which again is easily fixed by applying sealants.

Also,in some cases most especially during the winter months,condensation can happen inside a cabin. This is normal due to the cabins not having any insulation fitted,it is not a leak and can be fairly normal. We encourage at Timberdise to get a dehumidifier if you have power access in there and leave it running during the cooler months. This will help take water out of the air and further increase the life-span of your cabin.

If you follow all the above tips you should have a leak free cabin for the duration of its life-span which can provide endless enjoyment and relaxation.Bear in mind prevention is far better than the treatment.

Read more Are Garden Timber Cabins Watertight?